PMC Submersible Hydrostatic Depth/Level
Transmitters / Transducers
PMC VersaLine® Pressure Transmitters. PMC Engineering provides rugged and reliable pressure transmitters and transducers for measuring water and waste depth and level. The Versaline® submersible transmitters are based on more than 30 years of development to provide reliable products, customized for the demands of long term monitoring of ground, surface, waste water and oceanography. Features include rangeability, digital outputs, data-logger compatibility, small size and a titanium construction option backed by a 5 year warranty.
Contact ThermX Southwest for Availability & Engineering Support 1-800-284-3769.
PMC VersaLine® VL2000 Series
Data Sheet
The PMC VersaLine® VL2000 Series submersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic sensing element provides a rugged flush open face design which avoids clogging or sludge build up from the materials often encountered in wastewater. The stainless steel construction will satisfy most applications, but an option of Titanium is available where the chemical environments dictate. The standard polyurethane vented cable is molded to the transmitter providing the highest integrity waterproof assembly well proven in thousands of installations worldwide. FEP cable is available as an alternate for harsh environments. A feature of the VL2000 Series is full scale ranges as low as 10” WC.
Applications:
Surface and Run-Off Water
Process Plant Water Run-Off Monitoring
Sewage Lift Stations – Ceramic Clog-Free
Paper Making Machine
Specifications:
Ranges: Full Scale (Zero based)
0-10, 20, 30, 50” WC
0-1, 5, 10, 15, 30, 50, 100, 150 psig
Other ranges and pressure units can be specified.
±0.1%, ±0.25% Accuracies
All welded 316L SS or Titanium
4-20 mA, 2 wire output
Molded polyurethane
PMC VersaLine® VL2000-SW Series Data Sheet
The PMC VersaLine® VL2000-SW Series submersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic capacitive sensing element provides a rugged, open face design which avoids clogging or sludge build up from the material often encountered in wastewater. Designed specifically for the VL2000 the SW2000 provides a "cage" sink weight/anchor for transmitters installed on the bottom of wastewater sewage lift stations and is replaceable.
Applications:
Surface and Run-Off Water
Process Plant Water Run-Off Monitoring
Sewage Lift Stations – Ceramic Clog-Free
Specifications:
Open face, clog free
0.1%/0.25% Accuracy
10" WC to 150 psi
316L SS or Titanium
4-20 mA, 2 wire
PMC VersaLine® VL2000 Series Submersible Data Sheet
Sewage Lift Station Kit (SLS01) The PMC VersaLine® VL2000 Series Submersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The components that make up the Sewage Lift Station Kit SLS01 include the VL2113 with available pressure ranges of 2.5 to 150psig, the TE11 Termination Enclosure, MP11 Moisture Protection Reference Volume, SP10 Surge Protector, CH10 Cable Hanger and the SW2000 Sink Weight.
Primary Accessories for Depth and Level Transmitters, Submersible Transmitters
Moisture Protection Reference Volume (PMC Exclusive)
Dri-Box Cable Termination Enclosure
Surge Protector - Lightning Arrestor
Sink Weight
Cable Hanger
Desiccant Tube and Modules
FEP Cable
Applications:
Surface and Run-Off Water
Process Plant Water Run-Off Monitoring
Sewage Lift Stations – Ceramic Clog-Free
Landfill and Remediation
Clog-Free, Flush Mount Design
Ceramic Diaphragm resists mechanical damage and abrasion
Fully Potted & Molded Cable Seal eliminates moisture ingress
1” Diameter 316L SS Housing
Specifications:
Open face, clog free
0.1%/0.25% Accuracy
10" WC to 150 psi
316L SS or Titanium
4-20 mA, 2 wire
PMC MTM 3000 Miniature Depth Level Housing diameter of 0.39 inches Data Sheet
The MTM 3000 Miniature Depth and Level pressure sensor is available for applications where space is very limited. The housing diameter of 0.39 inches offers the user an ideal high performance level measurement in small diameter, i.e. 1/2" monitoring wells, stand pipes and bore holes. The Titanium construction and integral polyurethane cable provide a reliable long term solution for these difficult-to-measure applications. Kevlar is used as a cable reinforcement to avoid any elongation, particularly when long lengths of cable are required for deep wells. Long term stability of typically ±0.1% per year also contributes toward a maintenance-free installation.
Applications:
Ground Water
Landfill and Remediation
Dams and Rivers
Specifications:
Fully submersible, 0.39" diameter
Ranges: Full Scale (Zero based)
0-15 psig to 0-500 psig
Other ranges and pressure units can be specified.
0.10%, 0.25% & 0.5% accuracy
Material: Titanium with 5-year corrosion warranty
Millivolt output signal
Analog output signals with option: separate electronic circuitry
PMC VersaLine® VL4500 Series Data Sheet
The PMC VersaLine® VL4500 Series submersible transmitters are specifically designed for depth and level measurements of groundwater, wastewater, and sea water. Typical applications are small size bore holes, wells, dams, irrigation, sewage lift stations, rivers and oceanography. The titanium housing provides immunity to virtually all environments, especially including brackish or sea water, or other chemicals unsuitable for stainless steel. The standard polyurethane vented cable is molded to the transmitter providing the highest integrity waterproof assembly well proven in thousands of installations worldwide. Kevlar is used to avoid any cable elongation when longer lengths up to 1000 feet are required for deep wells. FEP cable is available as an alternate for harsh environments. A feature of the VL4500 Series is full scale ranges as low 30" WC.
Applications:
Ground Water
Irrigation
Shipboard Ballast Tanks
Specifications:
Ranges: Full Scale (Zero Based)
0-30, 50” WC
0-1, 5, 10, 15, 30, 50, 100, 150, 200, 300, 500 psig
0-50, 100, 150, 200, 300 psia
Other ranges and pressure units can be specified.
0.1% & 0.25% accuracy
.725" diameter welded titanium
Millivolt or 4-20 mA
Molded polyurethane cable
PMC VersaLine® VL3114 SDI-12 protocol Data Sheet
The PMC VersaLine® VL3114 features the SDI-12 protocol. RS485 (Modbus) is also available. Standard polyurethane vented cable is molded to the transmitter providing the highest integrity waterproof assembly well proven in thousands of installations.
SDI-12 stands for serial data interface at 1200 baud. It is a standard to interface battery powered data recorders with micro-processor based sensors designed for environmental data acquisition.
Applications:
Ground Water
Wastewater
Oceanography
Specifications:
SDI-12 v1.4 Protocol
<±0.25% Accuracy
0-20" WC to 0 - 700 psi
Level & Temperature Output
Lightning Protection
PMC VersaLine® VL5004 SDI-12 protocol Data Sheet
The PMC VersaLine® VL5004 Series features SDI-12 protocol. These precision submersible transmitters are specifically designed for depth and level measurements of groundwater and sea water. Typical applications are rivers, wells, dams, irrigation and oceanography. The stainless steel construction will satisfy many applications, and the titanium housing is ideal in brackish or sea water or other chemical environments unsuitable for stainless steel. The standard polyurethane vented cable is molded to the transmitter providing the highest integrity waterproof assembly well proven in thousands of installations worldwide. Kevlar is used to avoid any cable elongation.
Applications:
Ground Water
Wastewater
Oceanography
Specifications:
Ranges: Full Scale (Zero based)
Other ranges and pressure units can be specified.
SDI-12 v1.3 Protocol
Total Accuracy ±0.1%
Level and Temperature output
Molded polyurethane cable
Pp to 850 ft. on a Single Transmitter
